StoneAge

SAFETY DATA SHEETS (SDS)

The OSHA Hazard Communication Standard (HCS) requires chemical manufacturers, distributors, or importers to provide Safety Brochures (SDSs) (formerly known as Material Safety Brochures or MSDSs) to communicate the hazards of hazardous chemical products.

Employers must ensure that SDSs are readily accessible to employees. For more information: www.osha.gov

Product Name with Link to SDS Manufacturer/Distributor Product Description StoneAge Part #
242 Blue Threadlocker Loctite Loctite 242 Medium Strength Blue Threadlocker is a general purpose, removable threadlocker for fasteners between ÂĽ" and Âľ" (6 to 20 mm) diameters. GP 180
262 Threadlocker, Red Loctite Loctite 262 High Strength Red Threadlocker is a permanent threadlocker for fasteners up to Âľ" (20 mm) in diameter. Prevents rust and corrosion in extreme chemical and environmental conditions. BA 185
Alamo 525 Air Tool Oil Mobil Oil is formulated from high quality base stocks and additives, which provide chemical stability and protection against wear and corrosion. Oil provides an optimum balance of adhesiveness, yet is emulsifiable enough to pick up moisture which reduces the corrosive and wearing effects of water. GP 041
AOS Heat Sink Compound 52022 AOS Thermal Compounds A paste-like substance specifically designed to be applied at an interface between a heated surface and the surface of a heat sink. It speeds up the removal of heat from original surface (device) to another (heat sink). The device being cooled will operate more efficiently and the useful lifetime is increased. TR 282-1
AquaShield Houghton International, Inc. AquaShield is a multi-purpose lubricant and sealant that is compounded specifically to cling to metal and “O” ring surfaces, provide long term lubrication and rust protection. It is designed to seal out water and contaminants. GP 045
Araldite 2000+ Huntsman The Araldite 2000 PLUS range offers high performance and durable long term bonding. It has the ability to bond a wide range of substrates including metals, composites and plastics. The range also caters for particular requirements including heat and chemical resistance and provides a wide range of viscosities. TR 210.3
Blue Goop® Swagelok Thread lubricant, oil-based GP 043
C5-A® Henkel Copper Based Anti-Seize Lubricant BJ 062-S
Cetus HiPerSYN Oil 220 Chevron Compressor Oil GP 040
C5-A® Copper Anti-Seize Loctite Loctite C5-A is a copper based anti-seize which suspends copper and graphite in a high quality grease. Protects metal parts from rust, corrosion, galling, and seizing at temperatures to 1800°F (982°C). BJ 062-S
Cetus HiPerSYN Oil 100, 150, 220, 320, 460 Chevron Cetus® HiPerSYN® Oils are synthetic compressor oils. Cetus HiPerSYN Oils are recommended for air compressors; especially portable and stationary rotary, vane, and screw compressors. GP 040
Delo Grease EP 1, 2 Chevron Commercial Grease GP 049
Dexron III/ Mercon ATF NAPA A multi-functional automatic transmission fluid with specially selected friction modifiers that allow for friction retention which promotes long life performance. GP 042
Element 14 Momentive Low viscosity, linear Polydimethylsiloxane polymers with typical dynamic viscosities of 5 and 10mPa (cps). RJ 048-VF
High Performance SAE 80W-90 Gear Oil Valvoline High performance gear oil which is a thermally stable, extreme-pressure gear lubricant that tolerates severe temperatures and shock loading while providing excellent anti-wear, anti-scuffing and corrosion protection. GP 046
Mobilith SHC PM 460 Mobil Mobilith SHC 460 is an NLGI 1.5 Grade grease with ISO VG 460 synthetic base fluid and is an extreme pressure grease recommended for tough industrial and marine applications. It provides outstanding bearing protection under heavy loads at low-to-moderate speeds and in applications where water resistance is a critical factor. The recommended operating temperature range is -30Âş C to 150ÂşC. GP 048
Mobilith SHC 634 Exxon Mobil Mobil SHC 634 synthetic gear oil is a performance gear and bearing oil designed to provide outstanding equipment protection, oil life and problem free operation to enable increased customer productivity. GP 146
PSF-2,000cSt High Viscosity Silicone Damping Fluid Clearco Products Co., Inc. High viscosity pure silicone fluid which is a clear, colorless, and odorless linear Polydimethylsiloxane oil. It is characterized by its high damping action; excellent lubricity; inertness to plastics, rubbers, and metals; high dielectric strength; high resistance to shear; thermal stability; wide service temperature range; and low viscosity change at temperature. BJ 048-F
PSF-5,000cSt High Viscosity Silicone Damping Fluid Clearco Products Co., Inc. High viscosity pure silicone fluid which is a clear, colorless, and odorless linear Polydimethylsiloxane oil. It is characterized by its high damping action; excellent lubricity; inertness to plastics, rubbers, and metals; high dielectric strength; high resistance to shear; thermal stability; wide service temperature range; and low viscosity change at temperature. BJ 048-M
PSF-12,500cSt High Viscosity Silicone Damping Fluid Clearco Products Co., Inc. High viscosity pure silicone fluid which is a clear, colorless, and odorless linear Polydimethylsiloxane oil. It is characterized by its high damping action; excellent lubricity; inertness to plastics, rubbers, and metals; high dielectric strength; high resistance to shear; thermal stability; wide service temperature range; and low viscosity change at temperature. BJ 048-S
Premium Conventional SAE 10W40 NAPA SAE 10W-40 Motor Oil. GP 044
Premium Conventional SAE 10W40 Valvoline SAE 10W-40 Motor Oil. GP 044
Superbonder Loctite General purpose cyanoacrylate plastic bonder. TR 280
SynPower™ SAE 5W-30 Synthetic Motor Oil Valvoline A unique blend of premium synthetic and conventional base oils with advanced additive technology. GP 044-S
Threadmate II Parker Threadmate™ is an extreme-duty lubricant developed to reduce irritation during the assembly of pipe thread fittings. It promotes reliable sealing of pipe threads, even at high pressures. Threadmate is recommended for use on stainless steel pipe threads. GP 047