Beetle rotary tube cleaning nozzles for small pipes with bends thumb
Beetle rotary tube cleaning nozzles for small pipes with bends thumb
Beetle rotary tube cleaning nozzles for small pipes with bends thumb
Beetle rotary tube cleaning nozzles for small pipes with bends thumb
ZBeetle rotary tube cleaning nozzles for small pipes with bends thumb

Beetle BT9.5 Now Available

The Beetle product family is the only set of tools in the industry to deliver high pressure rotary jets in a form factor under 2 inches (51 mm) in length. The small diameter and short length of the Beetle models make them ideal for cleaning process piping, drain lines, u-tube bundles and other small ID conduit with bends that may have been inaccessible in the past.

Features

  • Clean radiused conduit with internal diameters as small as 0.47 in. (12 mm)
    See Tool Talk for minimum radius recommendations.
  • Patented liquid bearing design means no bearings, seals or lubricants to replace
  • Low cost, low maintenance, rebuildable
  • Effectively removes scale, carbons and polymers

Compatible with:

700 BTC NAV PRO 2L 3L
Contact Us for Quote
Tool Family Beetle
Tool Model BT9.5
Tube ID Range 0.47–.63 in. 12–16 mm
Pressure Range 8k–22k psi 550–1500 bar
Flow Range 5–7 gpm 19–23 l/min
Inlet Connection P1, M7
Diameter 0.37 in. 9.5 mm
Length 1.4 in. 33 mm
Maximum Water Temp. 250 °F 120 °C
See Tool Manual for model details.
Tool Family Beetle
Tool Model BT12
Tube ID Range 0.60–1.0 in. 15–25 mm
Pressure Range 8k–22k psi 550–1500 bar
Flow Range 5–8.5 gpm 19–32 l/min
Inlet Connection 1/16 NPT, M7, 1/4-28 LH & RH
Diameter 0.5 in. 13 mm
Length 1.3 in. 32 mm
Maximum Water Temp. 250 °F 120 °C
See Tool Manual for model details.
Tool Family Beetle
Tool Model BT18
Tube ID Range 0.90–1.3 in. 15–33 mm
Pressure Range 8k–22k psi 550–1500 bar
Flow Range 7-11 gpm 26–42 l/min
Inlet Connection 1/16 NPT, 1/8 NPT, 1/8 BSPP, 1/4-28 LH & RH, 3/8-24 LH & RH
Diameter 0.7 in. 17.5 mm
Length 1.5 in. 39 mm
Maximum Water Temp. 250 °F 120 °C
See Tool Manual for model details.
Tool Family Beetle
Tool Model BT25
Tube ID Range 1.2–3.0 in. 30-76 mm
Pressure Range 8k–22k psi 550–1500 bar
Flow Range 12-20 gpm 45–76 l/min
Inlet Connection 1/8 NPT, 1/4 NPT, 1/4 BSPP, 3/8-24 LH & RH, 9/16-18 LH & RH
Diameter 1.0 in. 25.4 mm
Length 1.9 in. 47.5 mm
Maximum Water Temp. 250 °F 120 °C
See Tool Manual for model details.

Banshee/Beetle Cleaning & Storage

Rotary Cleaning for Small Pipes with Bends

Beetle models are the solution for cleaning process piping, drain lines, u-tube bundles and other small ID tubes with bends and elbows that may have been inaccessible in the past.